Description
Duke TEHF-88SS Description Thurmaduke Hot Food Unit, mobile, 88”W X 32”D X 36”H, 16ga stainless steel top, (6) sealed hot food wells, 1” drain line & valve, stainless steel body & undershelf, 5” swivel casters & brakes, 6 ft cord and plug, cULus, EPH Classified
Options for Duke TEHF-88SS Serving shelves & sneeze guards Fabrication, electrical & special body modifications Move cord set to operator's left +$108.32
Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$211.34
Bumpers (3" x 3" rubber corners) (per set) +$179.48
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$86.02
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$86.02
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$86.02
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$212.40
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$658.44
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$202.84
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$320.72
Omission of shelves, open base +$945.18
Special Height Body, per unit
For special width body…per unit +$414.18
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$414.18
Individual brass valves +$904.82
Pedestal-type duplex outlet, mounted, not wired +$464.09
Pedestal-type duplex outlet, mounted, wired to existing power source +$630.83
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$862.34
Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$760.39
For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$414.18
6" high stainless steel legs in lieu of standard casters, with stainless steel adjustable foot
For pass-thru construction +$414.18
No Drains, in lieu of standard drains
Locate drains on left +$108.32
Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option +$1,102.36
Tray slide - operator's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$1,001.47
Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$1,104.48
Tray slide - customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$1,001.47
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$1,104.48
Kickplates Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$602.15
Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$646.76
Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$602.15
Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$646.76
Cutting board - customer's side Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,821.33
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$973.85
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$1,458.13
Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,949.83
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,102.36
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,585.57
Cutting board - operator's side Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,821.33
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$973.85
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$1,458.13
Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,949.83
Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,102.36
Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,585.57
Doors Sliding doors, customer's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$2,864.21
Sliding doors, operator's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$1,584.50
Sliding doors, stainless steel, for customer's side of hot food units with (6) openings (not available on gas models), UL, UL EPH Classified +$2,769.70
Sliding doors, stainless steel, for operator's side of hot food units with (6) openings (not available on gas models), UL, UL EPH Classified +$1,489.99
Close Description Duke Duke
TEHF-88SS
Electric Hot Food Serving Counter
with Controls, 
