FWE / Food Warming Equipment Co., Inc. P-144 1 Door Heated Banquet Cabinet Holds up to 120-144 Plates, 120 Volts

P-Series Banquet Cart, mobile, (1) compartment, (120-144) 11" diameter covered plate capacity, Humi-temp heat system, adjustable thermostat, recessed front controls, insulated, includes (3) wire shelves, wraparound bumper, (1) flush mounted door, stainless steel interior & exterior, 6" casters (2) rigid & (4) swivel with brakes, NSF, UL EPH Classified, cULus, IPX4

The P-144 1 Door Heated Banquet Cabinet from FWE is a great investment for caterers or any other operators that need to keep large batches of plated food warm in a highly-portable package. With three heavy-duty shelves, this cabinet can hold up to 144 covered 11”  plates stacked five high.

Setting the holding temperature is simple with the manual controls which allow for ten-degree increments between 90°F and 190°F. The interior temperature is monitored with a simple thermometer that does not require power. This cabinet is heated by FWE’s patented Humi-Temp system which utilizes an Incoloy nickel-chromium alloy heating element and a fan-cooled blower motor. A humidifying chamber with a baffled humidifier pan maintains the moisture.

The door is kept closed securely and opened easily with an edge-mounted full grip latch that is positive closing. The insulated stainless steel door is sealed by a cabinet mounted door gasket.

To make sure this cabinet is up to the task of serving in a commercial capacity it features 20 gauge stainless steel construction for the exterior. The exterior is polished for a clean look that’s easy to wipe down. The interior features 22 gauge stainless steel and coved corners that make cleaning as simple as possible. Keeping the interior nice and warm without using too much power is easy thanks to the UG-26 high-density fiberglass insulation in the top, sides, bottom, and back of the cabinet.

At the bottom of the cabinet, a 1.5” wide aluminum channel that’s bolted to the frame features a non-marking snap-in cushion that extends past the doors providing additional protection during transportation. To make this holding cabinet easy to move it rolls on 6” polyurethane casters.

To make sure this holding cabinet is up to the task of commercial use, it features CE and IPX4 certification as well as UL listing and UL EPH classification for safety and sanitation.

• Push/pull handles - allows easy maneuvering 
• Heavy-duty “no sag” shelves are removable to facilitate thorough cleaning 
• P series’ models holds up to 11″ plates. P-XL models are available for up to 12.375″ plates 
• Available for immediate shipment - FWE’s popular P-120 is available to ship in 48 hours (Quick Ship terms and conditions apply) 
• Eye level controls are up-front, recessed protected, easy to read and set, and include a full-range °F/°C thermostat for easy operation. Thermometer continuously reads cabinet temperature – even without power source! 
• FWE’s patented Humi-Temp heat and humidity system eliminates hot and cold spots by gently circulating hot, moist air throughout the interior of the cabinet. Humidity can be added to condition circulated heat, keeping food fresh and hot for hours 
• FWE banquet cabinets are constructed for high performance in restaurant and resort banquet operations. Engineered for transport applications - standard, stainless steel, tubular base frame is engineered to absorb vibration and shock during transport 

• ELECTRIC
  • Electronic controls
  • Upgraded element
  • Solar Digital Thermometer
  • 220 volt, 50/60 Hz, single phase
• DOORS
• • Paddle latch
  • Magnetic latch
  • Key locking door latch
  • Padlocking transport latch
• CASTERS
  • Floorlock
  • Larger casters
• EXTRAS
  • Dry erase board
  • Menu card holder
  • Cord winder bracket
  • Ergo drop down handle
  • Plate carriers: CP or UP
  • Extra shelves - factory installed