Garland US Range MST34BT Master Series Heavy Duty Range
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Garland US Range MST34BT Accessories
Description
Garland US Range MST34BT Description
With its stainless steel front and sides, this commercial range can handle heavy work in busy kitchens. The unit has passed CSA Flame, CSA Star, and NSF standards for safe commercial use.
CKitchen is your best source for top-quality restaurant and heavy-duty ranges and commercial cooking equipment!
- Stainless steel front rail
- 1-1/4" NPT front manifold
- Stainless steel front doors
- Stainless steel front and sides
- 15,000 BTU (4.39 kW) burners
- Storage base interior of aluminized steel
- 6" (152mm) chromed steel adjustable legs
- Piezo spark ignition with constant burning pilots
- Sentry total flame failure protection for all burners
- Electric Spark ignition on all pilots Suffix -E models
- Modular top broilers (suffix "BT"), modular broiler is 14-1/2" (368mm) from broiler base to working height
- Dual sided, cast iron broiler grates with 1/2" (13mm) rounded bar, (board brand) and diamond (fine) pattern on opposite sides
- Dais base
- Stainless steel main back
- Gas regulator 3/4" or 1-1/4"
- Rear gas connection; 3/4" NPT
- End caps and cover (NC, specify)
- Gas shut off valve; 3/4", 1" or 1-1/4" NPT
- 6" (152mm) stainless steel adjustable legs
- 230 volt, 50 cycle components, electric ignition, (export)
- Dual-sided, steel diamond, (fine) in lieu of cast iron grate
- Polyurethane non‑marking swivel casters (4) w/front brakes
- Stainless steel backguard: 10" (354mm), 17" (432mm) or 33" (838mm)
- Gas flex hose & quick disconnect (3/4", 1" or 1-1/4" NPT x 5') w/ restraining device, please specify
Master Series Charbroiler with stainless steel front and sides. Broiling area consists of heavy duty rack sections which are easily moved for flat or tilt position broiling. Dual sided, cast iron broiler grates with 1/2" (13mm) rounded bar, (board brand) and diamond (fine) pattern on opposite side. 15,000 BTU (4.39 kW) burners controlled by individual Hi-Lo valves. Sentry total flame failure protection for all burners Large capacity full length grease drawers. Heavyweight, long lasting briquettes. Cabinet, 17" (432mm), 24" (610mm), or 34" (864mm), wide by 34" (869mm) deep, with two stainless steel full-sized hinged doors and front. Natural gas or propane. Available in modular models, suffix BT. NOTE: Broilers supplied with casters must be installed with an approved restraining device.
Reviews
Garland US Range MST34BT Reviews
Peter J S (Worcester, Massachusetts)
This is a excellent charbroiler. Garland makes great products.
Q & A
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Certifications
Garland US Range MST34BT Certifications
CE
The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Garland US Range MST34BT Specifications
| BTU | 90,000 BTU |
|---|---|
| Total BTU | 16000 - 130000 |
| Number of Burners | 6 - 8 |
| Burner Style | Grates |
| Installation Type | Modular |
| Range Base Style | Modular Base |
| Certifications | CE, NSF, NSF |
| Exterior Finish | Stainless Steel Front & Sides |
| Base | Modular |
| Gas Type | LP, NG |
| Heat | Gas |
| Number of Ovens | None |
| Range Configuration | Charbroiler |
Additional Information on Garland US Range MST34BT
Contact us for details
- Please see specification sheet for installation clearance requirements
- Additional required flue riser sold separately







