John Boos 3PBPS3224-1D30R Commercial Sink, (3) Three Compartment, 16 Gauge Stainless Steel Construction with Stainless Steel Legs and With Right-hand Drainboard - 90.19" W
John Boos 3PBPS3224-1D30R Specifications
|Leg Construction||Stainless Steel Legs|
|Number of Drainboards||1|
|Number of Compartments||3|
|Drainboards||With Right-hand Drainboard|
Additional Information on John Boos 3PBPS3224-1D30R
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
John Boos 3PBPS3224-1D30R Certifications
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
John Boos 3PBPS3224-1D30R Description
- 12" & 14" Deep Three Compartment Sink Bowls
- 8" On-Center 1-1/8" Faucet Holes in Backsplash
- All Corners, both Vertical and Horizontal, Coved at 5/8" Radius
- Standard 16ga Type 300 Stainless Steel with #4 Polish, Satin Finish
- Solid Stainless Steel Front Panel, Type 300 Stainless Steel with #4 Polish, Satin Finish
- All Outside Corners of Assembly are Bullnosed to Provide Safe, Clean, and Polished Edge
- Bottoms of Commercial Sink Bowls Formed for Drainage to 3-1/2" Diameter Die Stamped Opening
- Full Length 10" High Boxed Backsplash, with 2" Return to Wall at 45 Degree and 3/4" Turned Down Rear Lip
- Note: More Restaurant Equipment, Compartment Sinks & Underbar Sinks are available.
- Base: Stainless Steel Bases, Standard K.D.
- Top: Stainless Steel Sinks are TIG Welded, Exposed welds are Polished to Match Adjacent Surface
- Gussets: Stainless Steel
- Legs: 1-5/8" Round O.D. Stainless Steel
- Bracing: 1-1/4" Round O.D. Stainless Steel
- Feet: 1" Adjustable Stainless Steel Bullet Feet
- Bowls & Top: 16ga Type 300 Stainless Steel with #4 Polish, Satin Finish
John Boos 3PBPS3224-1D30R Accessories
John Boos 3PBPS3224-1D30R Parts
All John Boos 3PBPS3224-1D30R Parts
John Boos 3PBPS3224-1D30R Reviews
There are no reviews yet for this product.