1 (800) 555-0666

Lakeside Manufacturing E6209 Express Heat™ Stainless Steel Enclosed Base 2 Stack Heated Mobile Plate Dish Dispenser for 8-1/4 to 9-1/8" Dishes

E6209
Made in USA
Stock Status
Updating. Please wait...
Free Freight
$4,416.50

or add to cart to see our price!

$4,253.09

You will earn 4417 Reward Points.

Product Protection
Coverage starting at
FINANCE

Monthly Payment *

Finance Payment Calculator
$91.40
* The above amount may vary depending on the applicant's credit history.

Lakeside Manufacturing E6209 Specifications

ModelCabinet
Base StyleEnclosed
SeriesExpress Heat™
Heat TypeHeated
Dispenser TypePlatter Dispenser
BrandLakeside Manufacturing
Made inUSA
Number of Compartments2
Certifications5-15P
TypeMobile
Dish Diameter8-1/4 to 9-1/8"
MaterialStainless Steel
Temperature Range150 Degrees F
Voltage120 Volts
Wattage750 Watts
Width (in)36.5
Height (in)39.88
Depth (in)20.75
Weight131.00

Additional Information on Lakeside Manufacturing E6209

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Lakeside Manufacturing E6209 Certifications

5-15P

5-15P

Two-pole with ground pin plug

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

Lakeside Manufacturing E6209 Description

Express Heat™ Plate Dispenser Cabinet, forced air heat, enclosed base, mobile design, welded double-wall stainless steel construction, (2) self-elevating dish dispensing tubes, accommodates plate size 8-1/4 to 9-1/8", (2) stainless steel heat retaining covers included, corner bumpers, 4" Lake-Glide™ swivel casters, (2) with brakes, 7' cord, NEMA 5-15P, 750 watts, 6.5amps, 120v/60/1-ph UL, NSF, Made in USA
Express Heat™ Plate Dispenser Cabinet, forced air heat, enclosed base, mobile design, welded double-wall stainless steel construction, (2) self-elevating dish dispensing tubes, accommodates plate size 8-1/4 to 9-1/8", (2) stainless steel heat retaining covers included, corner bumpers, 4" Lake-Glide™ swivel casters, (2) with brakes, 7' cord, NEMA 5-15P, 750 watts, 6.5amps, 120v/60/1-ph UL, NSF, Made in USA
Standard Features:
Heat Plates Evenly and Faster With Greater Efficiency.
  • Single thermostatic control operates both dispensers
  • Corner bumpers protect cabinet, furniture, and doors
  • Easy-Glide™ design provides quiet, non-stick operation
  • Double wall, all-welded stainless steel cabinet construction
  • 4” Lake-Glide® casters - all swivel, 2 with  brake, extra-load
  • Forced air heating system heats plates faster and more evenly
Optional Accessories:
  • Bottom perimeter bumper  
  • 8” (203 mm) vertical one-piece push handle
Specifications:
Mobile Cabinet: Mobile cabinets shall be of all-welded stainless steel construction. Cabinets shall have 18-gauge top and 20-gauge sides and bottom and shall include bottom corner bumpers. Cabinet bottom shall have center clean out hole. Cabinet sides and top shall be double-wall to provide heat retention and energy efficiency. Casters shall be 4” (102 mm) diameter non-marking swivel (two with brake). Unit shall feature a heavy-duty independent undercarriage frame of galvanized steel to which casters shall be mounted. Two each stainless steel heat retaining dish covers shall be included. Units shall be NSF and UL listed. 
Dispenser Tubes: Dispenser tubes shall be of welded stainless steel construction and shall drop into mobile cabinet top openings and feature open side design to allow flow of heated forced air to dishes. Dispensers shall hang from cabinet opening by an 18-gauge flange ring, and feature three each 22-gauge vertical side supports welded to 20- gauge bottom plate. Self-leveling dish carriage shall be of welded stainless steel construction and shall travel vertically in dispenser tube with nylon guides for smooth operation. Carriage shall have 22-gauge removable dish platform. Dispensers shall feature flange-mounted perimeter extension springs, which are detachable from the dish carriage, to provide tension adjustment without tools for different weight dishes. Adjust-a-fit® model dispensers shall feature a diameter adjustment range of 3 1/4”. Each dispenser shall have a vertical stacking capacity of 25” (635 mm). 
Heating System: Unit shall be 120 VAC 60 Hz, 6.5 amp and shall have a 7’ (2134 mm) SOOW power supply cord with 5-15P NEMA plug for 120 VAC. Cabinet shall have interior mounted 235CFM Class F convection fan to distribute heat evenly inside the cabinet. Heat shall be provided by a single 750 watt Incoloy® heating element. The heating system shall feature a single on/off switch with power indicator light and thermostatic control knob for the heater element and fan. Unit shall be capable of heating dishes up to 150º F evenly in 90 minutes. 

Options for Lakeside Manufacturing E6209

Handle
Perimeter bumper
Modification & customization note

Lakeside Manufacturing E6209 Parts

All Lakeside Manufacturing E6209 Parts

Lakeside Manufacturing E6209 Reviews

There are no reviews yet for this product.

Questions and Answers

Compare Lakeside Manufacturing E6209 to Other Products

Rating
Price
Material
Base Style
Number of Compartments
Type
Dish Diameter

Items Related to Lakeside Manufacturing E6209

Commercial Plates 2613 products
Plate Dispensers 465 products
BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Lakeside Manufacturing E6209 Express Heat™ Stainless Steel Enclosed Base 2 Stack Heated Mobile Plate Dish Dispenser for 8-1/4 to 9-1/8" Dishes
E6209 Express Heat™ Stainless Steel Enclosed Base 2 Stack Heated Mobile Plate Dish Dispenser for 8-1/4 to 9-1/8" Dishes
$4,416.50 $4,416.50 $4,253.09