Vulcan K20ETT Tilting Kettle

• Faucet bracket.
• One year limited parts and labor warranty.
• Removable electric elements are field serviceable.
• Stainless steel adjustable legs extend 6" below base.
• Stainless steel tilt handle with insulated pull knob located on the right.
• 20 gallon capacity, 2⁄3 jacketed self-contained electric tilting steam kettle.
• Jacket contains water, rust inhibitor and antifreeze mixed to protect to 30° below zero.
• Shipped for 208/60-50/3 electrical service. Can be field converted to 208/60-50/1 and 240/60-50/3 and 240/60-50/1.
• Stainless steel “water proof” control housing located on the right. Controls include a power switch, power “on” light, solid state temperature control, vacuum/pressure gauge, pressure relief valve, low water light and low water shut-off.
• Ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with 1⁄4 x 5⁄8 inch bar rim with butterfly shaped pouring lip and embossed  gallon/liter markings, designed to operate at a maximum of 50 psi (3.4 kg/cm2).

Options

• 480 volt, 60 Hz, 3 phase power supply.
• Second year extended limited parts and labor warranty.
• Correction facility package.
• Security type tamper resistant fasteners with tack welds.

Accessories (Packaged & Sold Separately)

• Tilting kettle strainer.
• Stainless steel basket assembly.
• One piece lift-off stainless steel cover.
• (12") (18" double jointed) single pantry faucet.
• (12") (18" double jointed) double pantry faucet.
• Double pantry pot filler and backflow preventer.
• Double pantry washdown hose with backflow preventer.
• Double pantry washdown hose with 16" add-on faucet with backflow preventer.

Specifications
20 gallon capacity, 2⁄3 jacketed self-contained electric tilting kettle, Vulcan-Hart Model No. K20ETT. Ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with 1⁄4 x 5⁄8 inch bar rim with butterfly shaped pouring lip and embossed gallon/liter markings, designed to operate at a maximum of 50 psi (3.4 kg/cm2). Jacket contains water, rust inhibitor and antifreeze mixed to protect to 30° below zero. Removable electric elements are field serviceable. Stainless steel tilt handle with insulated pull knob located on the right. Stainless steel “water proof” control housing located on the right. Controls include a power switch, power “on” light, solid state temperature control, vacuum/pressure gauge, pressure relief valve, low water light and low water shut-off. Stainless steel adjustable legs extend 6" below base. Shipped for 208/60-50/3 electrical service. Can be field converted to 208/60-50/1 and 240/60-50/3 and 240/60-50/1. UL listed. UL Classified for sanitation in accordance with ANSI/NSF Standard #4. Meets ASME code.