Delfield CAB4-575ET Dispenser

CAB4-575ET
Delfield CAB4-575ET Dispenser
Free Freight
Price $3,054

FINANCEFOR $76.59/mo.

Delfield
More from Delfield
PayPal CREDIT
Specs
BrandDelfield
Width (in)27
Height (in)36
Depth (in)27
Weight230
Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Description
Dispenser, Heated Dish, enclosed mobile design, four self-elevating dish dispensing tubes, maximum dish size approximately 5-3/4" diameter, stainless steel construction, with 400 watt heating element, 4" casters, cUL, UL, NSF
Standard Features:
  • 9’ cord and plug
  • Air intake shall be filtered
  • On/off switch on each dispenser
  • Non-marring gray corner bumpers
  • ET maintains 120-140°F (49-60°C)
  • QT maintains 150-170°F (66-77°C)
  • Spring supports to be 14-gauge S/S
  • Adjustable thermostat per dispenser
  • QT- stainless steel cover per dispenser
  • Field adjustable self-leveling mechanism
  • (4) 4.00” locking polyolefin swivel casters
  • Cabinet top to be 16-gauge stainless steel
  • 22-gauge stainless steel jacket around dispenser
  • High impact plastic guide posts mounted to flange
  • Outer body and corners to be 20-gauge stainless steel
  • Convection heating module and fan motor per dispenser
  • Dispenser flange, channels and bottom to be integrally welded
  • One year parts and 90 day labor warranty Heated, QT & ET, Features
  • Carrier head made of welded rods with a removable 18-gauge top plate
  • Dispenser top flange, vertical side channels and bottom brace are stainless steel
Options & Accessories:
  • Wrap-around bumpers
  • Four 4” or 5” polyurethane casters
  • Hold-down rod for dispenser tubes
  • Flange-mount feet in lieu of casters
  • Shorten dispenser tubes to special length
  • 220 volt, 50/60 cycle, single phase electrical connections
  • Stainless steel tube cover (-500 through -725 models only)
  • Stainless steel dome cover (-813 through -1450 models only)
  • 12” diameter S/S dish dispenser tray (-1200 and -1450 models only)
  • Rods for oval dishes and diameter adjustment (-813 through -1450 only)
  • Note: Inclusion of these options will alter the electrical specifications of unit
Specifications:
Cabinet top shall be 16-gauge stainless steel with all corners welded and polished and reinforced with heavy-gauge channels. Cabinet exterior panels and corner support angles shall be 20-gauge stainless steel. Unit shall have four 4.00" (10cm) diameter polyolefin swivel casters, and non-marking gray bumpers at each corner. Dispenser tube shall have 3 vertical side channels and a bottom brace of 22-gauge stainless steel. Top supporting flange shall be 18-gauge stainless steel. Flange, channels and bottom brace shall be integrally welded together. Flange shall have 3 guide posts molded from high impact plastic. Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels. The dish carrier head shall be stainless steel welded rods with a removable 18-gauge stainless steel top plate. Capacity of tubes shall be approximately 72 dishes, with a maximum stacking height of 24.00" (61cm). Models without “-ET” or “-QT” suffix are unheated. The following applies to cab4-et even temp heated dispensers only: Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 or 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F–140°F (49°C–60°C). The following applies to cab4-qt quick temp heated dispensers only: Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F–170°F (66°C–77°C). Each tube shall have a stainless steel dome cover. 
Options
Wrap around bumpers
Shorten dispenser
Casters or flanged feet
Exterior panels
Extended warranty
Options & accessories
Voltages
Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Delfield CAB4-575ET Dispenser
CAB4-575ET Dispenser
$3,929