Delfield T-1826H Dispenser

Delfield T-1826H Dispenser

T-1826H
$5,002.80
Free Freight
$3,801.24
Free Freight

You will earn 3801 Reward Points. Earn 1 reward point for every 1 dollar spent.
Read more.

Contact us for details

FINANCEFOR $81.69/mo.
Description
Dispenser, Heated Tray, enclosed mobile design, single self-leveling tray platform, for 18" x 26" trays, 4" casters, cUL, UL, NSF
Heated Tray Dispenser, enclosed mobile design, single self-leveling tray platform, for 18" x 26" trays, 4" casters, cUL, UL, NSF (more commercial dispensers available)

Standard Features:
  • T Series Only
    • Non-marring corner gray bumpers
    • Cabinet sides to be 20 gauge stainless steel
    • (4) 4.00” polyolefin swivel casters (all locking)
    • Cabinet bottom to be 14 gauge galvanized steel
    • One year parts and 90 day labor standard warranty
    • Cabinet top to be 16 gauge stainless steel, welded, polished and reinforced
    • Dispenser platform carrier shall be 18 gauge stainless steel and removable for cleaning
    • Self-leveling mechanisms shall be adjustable by adding and removing stainless steel extension springs located inside the elevator housing
  • T/T2-H Series Only
    • Adjustable thermostat
    • Air intake is standard with filter
    • One year parts and 90 day labor warranty
    • On/off switch and 9’ cord and plug standard
    • Temperature between 150-170°F (66-77°C)
    • Dispenser is heated with convection heated modules
    • Heated dispenser has a stainless steel liner and 2.00” of fiberglass insulation
Options & Accessories
  • Special height
  • Laminate panels
  • Wrap-around bumpers
  • Special tray & rack sizes
  • 4” or 5” polyurethane casters
  • Flange-mount feet in lieu of casters
  • Additional plastic or stainless steel silverware cylinders
  • Six, eight, or ten hole silverware bins with plastic or stainless steel cylinders
Specifications
Cabinet top shall be 16-gauge stainless steel with all corners welded, polished and reinforced with heavy-gauge channels. Cabinet exterior panels shall be 20-gauge stainless steel. Dispenser platform carrier shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing. The Following Applies To T/T2-H Heated Dispensers Only: Heated dispensers shall have a stainless steel liner separated from the outer panels by 2.00” (5cm) of fiberglass insulation. Unit shall be supplied with 9’ (2.7m) cord and plug as shown in the specifications table on reverse. Dispenser shall have one or two convection heating modules consisting of a single 700-watt heating element and fan motor, located in the center of the interior bottom cavity. Dispenser shall have an adjustable thermostat and an ON/OFF switch on the side of the unit. 
Options
Napkin & silverware dispenser
Bumper, flanged feet & casters
Dust cover
Height modification
Panels
Parts & labor warranty
Voltages
Specifications
BrandDelfield
CertificationsNSF
Width (in)32.75
Height (in)36
Depth (in)26.12
Weight195
Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Related Items
Tray Dispensers
Tray Dispensers 180 products
Commercial Racks
Commercial Racks 1816 products
Kitchen - Clearance Sale
Delfield T-1826H Dispenser
T-1826H Dispenser
$5,002.80
Contact Us
1 (800) 555-0666