1 (800) 555-0666

Hatco FR-6 Food Rethermalizer/Bain Marie Heater

FR-6
Made in USA
Stock Status
Updating. Please wait...
Free Freight
$1,705.55
$1,705.55

You will earn 1706 Reward Points.

Product Protection
Coverage starting at
FINANCE

Monthly Payment *

Finance Payment Calculator
$36.65
* The above amount may vary depending on the applicant's credit history.

Hatco FR-6 Specifications

BrandHatco
Made inUSA
CertificationsCE
ControlsUnit
HeatElectric
Temperature Range140 - 190 Degrees F
Voltage208 Volts
Wattage6.0 Kilowatts
Width (in)6.75
Height (in)12.25
Depth (in)16.88
Weight28.00

Hatco FR-6 Certifications

CE

CE

The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

UL EPH

UL EPH

Certifies that the goods conform to public health and environmental quality compatibility requirements.

UL EPH Classified

UL EPH Classified

This product complies with UL EPH standards and meets ANSI/NSF requirements.

Hatco FR-6 Description

Food Rethermalizer/Bain Marie Heater, Electric, stainless steel front, silver-gray hammertone body, black base, 6kW, NSF, UL, UL EPH Classified, CSA, CE, Made in USAFood Rethermalizer/Bain Marie Heater, Electric, stainless steel front, silver gray hammertone body, black base, 6 kW, NSF, UL, UL EPH Classified, ANSI/NSF 4, CSA, Made in USA
 
Standard Features:
The Hatco FR is designed to be used with a Bain-Marie or food reconstitutor, to heat or hold foods at safe temperatures between 140°F and 190°F (60°-88°C). 
FLEXIBILITY
  • The FR mounts easily to the underside of a holding vessel, leaving the entire vessel area free. Water is continually circulated to avoid any “cool”spots.
  • The unit controls water temperature from 140°F (60°C) to 190°F (88°C). The Hatco FR is shipped factory assembled, pre-wired, and includes standard 2" (51 mm) plated brass plumbing fittings for mounting into a holding tank. A full-size template is supplied to properly locate fitting holes. 
QUALITY
  • The following features assure the finest performance for years to come: 
  • FR models feature a stainless steel tank with a five-year limited warranty. 
  • The Hatco FR has separate sump and heating compartment drains for cleaning and sanitizing.
  • An optional low-water cut-off is available to prevent element burn-out due to a low water condition. 
  • Every Hatco FR is equipped with an ECO (Energy Cut-Off ) wired into the electrical circuit. This built-in protection “breaks”the power to the elements if the temperature of the water goes above the normal thermostat setting. 
Options: (Not for Retrofit)
  • Security Package
  • Low-Water Cut-Off
  • Wiring to CSA Specifications
  • Stainless Steel Body and Base
  • 4' (1219 mm) Cord with Plug (NEMA 6-20P) and Receptacle (NEMA 6-20R) (FR-3 only)
  • 4' (1219 mm) Cord with Plug (NEMA 6-30P) and Receptacle (NEMA 6-30R) (FR-4 only)
Accessories:
  • Flush Hose Kit
FOOD RETHERMALIZING REQUIREMENT 
NSF Standard 4 has added performance requirements for food rethermalizing. The requirements mirror the requirements for food rethermalizing in the FDA Food Code. The basic requirement is that food reaches a temperature of 165°F (74°C) in a time period of two hours or less. Appliances that are manufactured for the purpose of rethermalizing food will need to meet these performance requirements in order to be listed to NSF Standard 4. Hatco sells a heating unit specifically made to be used for food rethermalizing, however, the heating unit is designed to be incorporated into a hot water bath rethermalizer. Hatco does not supply the vessel that contains the water, nor the system which determines how food is placed and held in the vessel. The Hatco FR unit simply attaches to the bottom of the vessel and supplies hot water to the vessel. Hatco does supply sizing recommendations to enable the appliance manufacturer to correctly size the FR unit to the vessel. However, there are variables in the way that the vessel is manufactured that affect its ability to pass the NSF performance requirements. The Hatco FR unit is listed with NSF for construction only. Due to the fact that the FR is only a portion of a larger system, it is impossible to do performance testing until the FR unit is incorporated onto the water vessel. The result is that it is the responsibility of the vessel manufacturer to have the entire rethermalizing appliance tested and listed in accordance with NSF Standard 4. Simply hanging an NSF listed FR unit on the appliance does not transfer NSF listing to the entire appliance.

Options for Hatco FR-6

CE Mark
Canada only
Low water cut-off & flush hose
Stainless steel body & security
What is included
  • Pricing note: NOTE: Sale of this product must comply with Hatco's Minimum Resale Price Policy; consult order acknowledgement for details
  • Factory note: NOTE: Includes 24/7 parts & service assistance, call 414-671-6350
Voltages

Hatco FR-6 Accessories

Hatco FR-FLUSH Flush hose kit FR-FLUSH
$52.80

Hatco FR-6 Parts

All Hatco FR-6 Parts

Hatco FR-6 Reviews

There are no reviews yet for this product.

Questions and Answers

Items Related to Hatco FR-6

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Hatco FR-6 Food Rethermalizer/Bain Marie Heater
FR-6 Food Rethermalizer/Bain Marie Heater
$1,705.55