Vulcan 1VK65C PowerFry5 51 - 90 lb. Gas Floor Model Full Pot Fryer with Computer Controls - 80,000 BTU
Energy Star ?Chat Now
Calculate
Vulcan 1VK65C Specifications
| Total BTU | 80,000 BTU |
|---|---|
| Installation Type | Freestanding |
| Series | PowerFry5™ |
| Construction | Stainless Steel |
| Burner Style | Tube |
| Brand | Vulcan |
| Energy Efficiency | Energy Star |
| Fry Pot | Stainless Steel |
| Made in | USA |
| Certifications | NSF |
| Power Type | Gas |
| Model | Free Standing |
| Basket | Twin |
| Basket Lifts | No |
| Control Type | Programmable |
| BTU | 80,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Controls | Programmable Computer |
| Capacity | 51 - 90 lb. |
| Heat | Natural or Propane Gas |
| Width (in) | 21 |
| Height (in) | 47.25 |
| Depth (in) | 30.13 |
| Weight | 237.00 |
Additional Information on Vulcan 1VK65C
parts-catalog.pdf 
computer-control-brochure.pdf 
service-manual.pdf 
installation-operation.pdf 
sell-sheet.pdf 
parts-list.pdf 
brochure.pdf 
vulcan-1vk65c.specsheet.pdf 
owner-s-manual.pdf 
warranty-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 1VK65C Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 1VK65C Description
For commercial kitchens that need a reliable deep fryer that efficiently uses gas, the 1VK65C PowerFry5™ Fryer from Vulcan is an easy pick that offers 65-70 lbs of oil capacity. Naturally, this fryer is ENERGYSTAR® qualified, but it is also one of the most energy-efficient deep Commercial Deep Fryers available.
Most tube-fired fryers use multiple burners each in their own heat exchange tube. This evenly distributes heat but a lot of heat is wasted and is vented from the fryer immediately. Vulcan’s FivePass™ heat transfer takes a different approach, a single burner that branches off into two heat exchange tubes that bend back and forth to extend the length of the heat exchange tubes to heat oil evenly while harnessing more of the heat from the burned gas that would otherwise be unused. With 68% cooking efficiency and 78% thermal efficiency, this fryer is much better than other fryers on the market at harnessing the heat of burning gas. This fryer features a SoftStart™ ignition system that only uses 35,000 BTU/hr of gas at start up to gradually heat oil without breaking it down which will extend its life. When this fryer is idle it only burns 4,802 BTU/hr of gas to maintain the cooking temperature.
With programmable computer controls, this fryer allows users to easily select a menu item from the up to ten programmable selections. A digital display shows users the item names and cook times for quick reference. Programming the fryer is simple via a USB interface making it easy to update multiple fryers with the same parameters. The temperature can be set accurately between 200°F and 390°F with fast recovery time and cook time can be based on actual time or compensating time. Conveniently this fryer has three melt modes and electronic ignition,
Stainless steel construction of the cabinet and fry tank make sure cleaning and maintenance are as easy as possible. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.
This fryer is designed to use a total gas input of 80,000 BTU/hr and comes with a NEMA 5-15P cord and plug to connect it to 120v power.
Standard Features:
- Hi-limit shut-off.
- 80,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,802 BTU/hr. to save energy.
- Stainless steel fry tank, 65 - 70 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 9 1⁄4"w x 13 1⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 13 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
65 - 70 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK65A) (1VK65D) (1VK65C). 80,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,802 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 1VK65C Accessories
Vulcan 1VK65C Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Vulcan 1VK65C
