Vulcan 3TR85AF PowerFry3™ (3) 85-90 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 270,000 BTU

For commercial kitchens that do a lot of deep-frying, a three-fryer system with fry tanks that hold 85-90 lbs each is an incredible piece of equipment that needs to be extremely reliable. The 3TR85AF PowerFry3™ Fryer from Vulcan offers this reliability while lowering operational costs with its energy-efficient heat transfer system and built-in filtration. These Commercial Deep Fryers are ENERGYSTAR® qualified and at the top of the list for the most efficient models available. Floor Model Gas Fryers from Vulcan are designed to be incredibly reliable, efficient, and user friendly.

Unlike most fryers with multiple burners in separate heat exchange tubes to evenly heat oil, Vulcan’s ThreePass™ heat transfer system uses a single burner chamber that splits off into two heat exchange tubes that double over themselves to apply more heat to the oil while burning much less gas. The groundbreaking design of the heat transfer system yields this fryer with 72% thermal efficiency and 60% cooking efficiency. To maintain the oil temperature at idle each fryer only uses 5,575 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to  45,000 BTU/hr to gradually apply heat.

This fryer uses a simple to use solid stat analog knob located behind the door to control the temperature between 200° and 390°F. To make using this fryer simple it features electronic ignition and fat melt modes.

To maintain the quality of the oil for extended periods, this fryer system has the KleenScreen PLUS® filtration system that utilizes a stainless steel mesh filter. The filtration system is kept inside an 18 gauge stainless steel filter vessel and particles down to .5 microns can be filtered out with the use of optional KleenScreen PLUS® filter envelopes. Filtration time is kept to a minimum by a ⅓ HP pump that moves oil at 8 GPM.

The fry tank and cabinet are made from durable stainless steel to make sure this fryer stands up to daily use without issue. Moving this fryer around is easy with the adjustable 6” casters which also make keeping it level simple. Twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod are also included for convenience.

The total gas input required by this fryer is 270,000 BTU/hr and it comes with a NEMA 5-15P cord and plug to connect it to a 120v outlet.