Southbend HDG-60 60'' Countertop Gas Griddle with Thermostatic Controls - 150,000 BTU
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Southbend HDG-60 Accessories
Description
Southbend HDG-60 Description
Commercial Countertop Griddle, gas, 60" W x 24" D cooking surface, 1" thick polished steel plate, thermostatic controls, battery spark ignition, flame failure safety device, stainless steel front, sides & 4" adjustable legs, 150,000 BTU, CSA, NSF (Note: Qualifies for Southbend's Service First™ Program, see Service First document for details) (more flat top grills & griddles, countertop ranges, commercial grills, and other cooking equipment available)
Features
- Gas-powered countertop griddle for commercial use
- Cooking surface measurements: 60 inches wide by 24 inches deep
- Includes a 1-inch-thick polished rolled steel plate cooking surface
- Insta-on thermostatic controls for precise settings between 200 and 400 degrees Fahrenheit
- Battery-powered electronic spark ignition
- Stainless steel front, vent and sides
- Aluminized steel rear and bottom panels
- Reinforced, insulated double wall sides
- 4-inch adjustable stainless steel legs
- 5-inch rear and 4-inch side splash guards
- 75-inch rear gas connection and pressure regulator
- Protected flue opening
- Large-capacity grease drawers
- Imbedded load-sensing thermostat
- Flame failure safety device
- 150,000 BTU
- CSA and NSF
Options
Q & A
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Southbend HDG-60 Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 105000 - 156000 |
| Installation Type | Countertop |
| Power Type | Natural or Propane Gas |
| Cooking Surface Material | Polished Steel |
| Construction | Stainless Steel |
| With Griddle | Yes |
| Brand | Southbend |
| Number of Burners | 2 |
| Certifications | NSF |
| Control Type | Thermostatic |
| BTU | 150,000 BTU |
| Heat | Gas |
| Usage | Standard Duty |
| Width (in) | 60 |
| Height (in) | 16.13 |
| Depth (in) | 33.75 |
| Weight | 705.00 |
Additional Information on Southbend HDG-60
Southbend HDG-60 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Compare Southbend HDG-60 to Other Products
Items Related to Southbend HDG-60
