Vulcan 1VK65A PowerFry5 51 - 90 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 80,000 BTU
Energy Star ?Chat Now
Calculate
Vulcan 1VK65A Specifications
| Total BTU | 80,000 BTU |
|---|---|
| Installation Type | Freestanding |
| Series | PowerFry5™ |
| Control Type | Solid State |
| Construction | Stainless Steel |
| Burner Style | Tube |
| Brand | Vulcan |
| Energy Efficiency | Energy Star |
| Fry Pot | Stainless Steel |
| Made in | USA |
| Certifications | NSF |
| Power Type | Gas |
| Model | Free Standing |
| Basket | Twin |
| Basket Lifts | No |
| BTU | 80,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Controls | Solid State Analog Knob |
| Capacity | 51 - 90 lb. |
| Heat | Natural or Propane Gas |
| Width (in) | 21 |
| Height (in) | 47.25 |
| Depth (in) | 30.13 |
| Weight | 237.00 |
Additional Information on Vulcan 1VK65A
installation-operation.pdf 
parts-list.pdf 
sell-sheet.pdf 
service-manual.pdf 
vulcan-1vk65a.specsheet.pdf 
warranty-sheet.pdf 
owner-s-manual.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 1VK65A Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 1VK65A Description
If you’re looking for an incredibly efficient gas fryer that holds 65-70 lbs of oil the Vulcan 1VK65A PowerFry5™ Fryer is a great choice. This fryer is ENERGYSTAR® qualified and one of the most energy-efficient units that you can buy. If your commercial kitchen needs Floor Model Gas Fryers, Vulcan has a large selection of Commercial Deep Fryers to choos from to fit specific use cases.
The FivePass™ heat transfer system in this fryer is unlike the multiple heat exchange tubes and burners found inside other fryers. The burner and heat exchange tubes look like they belong under the hood of a racecar, snaking back and forth with smooth bends. This design effectively extends the length of the heat exchange tubes while using s a single burner. This also increases the surface area to transfer more heat to the oil for the same amount of fuel burned. Vulcan’s out of the box design yields this fryer with 78% thermal efficiency and 68% cooking efficiency, unheard of in other fryers. For even more efficiency, this fryer has a SoftStart™ ignition system that gradually heats the oil at a rate of 35,000 BTU/hr which extends the life of the oil and when idle the fryer only consumes 4,802 BTU/hr to maintain the cooking temperature.
To control the frying temperature a solid state analog knob behind the door allows users to set temperatures between 200° and 390°F. For convenience, an electronic ignition quickly gets the fryer started while fat melt modes take the guesswork out of bringing lard to a boil.
Stainless steel construction of the cabinet and fry tank make sure cleaning and maintenance is as easy as possible. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.
To power this fryer it needs 80,000 BTU/hr of gas input and a 120v NEMA 5-15P cord and plug are included.
Standard Features:
- Hi-limit shut-off.
- 80,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,802 BTU/hr. to save energy.
- Stainless steel fry tank, 65 - 70 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 9 1⁄4"w x 13 1⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 13 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
65 - 70 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK65A) (1VK65D) (1VK65C). 80,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,802 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 1VK65A Accessories
Vulcan 1VK65A Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Vulcan 1VK65A
