Vulcan 1VK85A PowerFry5 51 - 90 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 90,000 BTU
Energy Star ?Chat Now
Calculate
Vulcan 1VK85A Specifications
| Total BTU | 90,000 BTU |
|---|---|
| Installation Type | Freestanding |
| Series | PowerFry5™ |
| Control Type | Solid State |
| Construction | Stainless Steel |
| Burner Style | Tube |
| Brand | Vulcan |
| Energy Efficiency | Energy Star |
| Fry Pot | Stainless Steel |
| Made in | USA |
| Certifications | NSF |
| Power Type | Gas |
| Model | Free Standing |
| Basket | Twin |
| Basket Lifts | No |
| BTU | 90,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Controls | Solid State Analog Knob |
| Capacity | 51 - 90 lb. |
| Heat | Natural or Propane Gas |
| Width (in) | 21 |
| Height (in) | 47.25 |
| Depth (in) | 34.38 |
| Weight | 267.00 |
Additional Information on Vulcan 1VK85A
service-manual.pdf 
parts-list.pdf 
sell-sheet.pdf 
installation-operation.pdf 
vulcan-1vk85a.specsheet.pdf 
owner-s-manual.pdf 
warranty-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 1VK85A Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 1VK85A Description
The Vulcan 1VK85A PowerFry5™ Fryer is a reliable deep fryer designed for efficiency and holds 85-90 lbs of oil. Naturally, this fryer is ENERGYSTAR® qualified, but it is also one of the most energy-efficient deep Commercial Deep Fryers available. The variety of Floor Model Gas Fryers offered by Vulcan are designed from the ground up to provide operators with a wide range of options to best fit their needs.
Most tube-fired fryers use multiple burners each in their own heat exchange tube. This evenly distributes heat but a lot of heat is wasted and is vented from the fryer immediately. Vulcan’s FivePass™ heat transfer takes a different approach, a single burner that branches off into two heat exchange tubes that bend back and forth to extend the length of the heat exchange tubes to heat oil evenly while harnessing more of the heat from the burned gas that would otherwise be unused. This fryer has a cooking efficiency of 68% and 78% thermal efficiency, making it much more effective at transferring heat energy from combustion to actually usable cooking heat than other fryers on the market. This efficiency is evident in the fact that this fryer only uses 6,298 BTU/hr to maintain the cooking temperature when idle and thanks to the SoftStart™ ignition system only 35,000 BTU/hr is used to gradually heat the oil at startup which will extend its life.
This fryer uses a simple to use solid stat analog knob located behind the door to control the temperature between 200° and 390°F. To make using this fryer simple it features electronic ignition and fat melt modes.
Stainless steel construction of the cabinet and fry tank make sure cleaning and maintenance are as easy as possible. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.
To power this fryer it needs 90,000 BTU/hr of gas input and a 120v NEMA 5-15P cord and plug are included.
Standard Features:
- Hi-limit shut-off.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 6,298 BTU/hr. to save energy.
- Stainless steel fry tank, 85 - 90 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 65% cooking and 78% thermal efficiency.
- FRYMATE-VX21S add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 8 3⁄4"w x 16 3⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 17 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
85 - 90 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK85A) (1VK85D) (1VK85C). 90,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 65% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 6,298 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 1VK85A Accessories
Vulcan 1VK85A Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Vulcan 1VK85A
