Vulcan VFRY18F V Series 15 - 50 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 70,000 BTU
Energy Star ?Chat Now
Calculate
- Please see specification sheet for installation clearance requirements
- Requires optional flue with back-splash or back-shelf.
- Additional required flue riser sold separately
Vulcan VFRY18F Specifications
| Total BTU | 70,000 BTU |
|---|---|
| Installation Type | Floor Model |
| Control Type | Solid State |
| Construction | Stainless Steel |
| Burner Style | Tube |
| Series | V Series |
| Brand | Vulcan |
| Energy Efficiency | Energy Star |
| Fry Pot | Stainless Steel |
| Made in | USA |
| Certifications | NSF |
| Power Type | Gas |
| Basket Lifts | Yes |
| BTU | 70,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Controls | Solid State Analog Knob |
| Capacity | 15 - 50 lb. |
| Heat | Natural or Propane Gas |
| Width (in) | 18 |
| Height (in) | 48.38 |
| Depth (in) | 40 |
| Weight | 215.00 |
Additional Information on Vulcan VFRY18F
fry-tank-warranty.pdf 
warranty.pdf 
sell-sheet.pdf 
owner-s-manual.pdf 
vulcan-vfry18f.specsheet.pdf 
warranty-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan VFRY18F Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan VFRY18F Description
If your commercial kitchen needs a gas-fired deep fryer that burns gas efficiently while reducing overhead costs with a filtration system, you should consider getting the Vulcan VFRY18F V Series Heavy Duty Range Match Fryer which offers 45-50 lbs of oil capacity. Naturally, this fryer is ENERGYSTAR® qualified, but it is also one of the most energy-efficient deep Commercial Deep Fryers available. If you’re looking at Floor Model Gas Fryers that are designed from the ground up for efficiency, ease of use, and durability; Vulcan’s fryers have a lot to offer.
Vulcan’s ThreePass™ heat transfer system is revolutionary. Unlike most tube-fired fryers that have multiple burners with their own heat exchange tubes to distribute heat evenly, Vulcan’s approach uses a single large burner that splits off into two runs of heat exchange tubes that bend back and forth to increase the length of the heat exchange tubes while evenly heating oil with a larger surface area. This makes use of more of the thermal energy provided by the burning gas before being exhausted, basically recovering efficiency from something that would otherwise be wasted. The unique design provides astonishing figures: 72% thermal efficiency and 60% cooking efficiency, much greater than the competition. This fryer features the SoftStart™ ignition system that reduces the burn rate at start up to gradually heat the oil which prolongs the life of the oil by preventing it from breaking down from excessive heat.
To control the frying temperature a solid state analog knob behind the door allows users to set temperatures between 200° and 390°F. This fryer features users selectable fat melt modes and electronic ignition.
Thanks to the built-in filtration system oil can be used for much longer without needing to be changed reducing downtime and operational costs. The KleenScreen PLUS® filtration system features a stainless steel mesh filter to remove particles.
Stainless steel construction of the cabinet and fry tank make sure cleaning and maintenance is as easy as possible. This fryer comes standard with adjustable 6” casters to make it easy to move around for cleaning and maintenance.
This fryer uses standard 120-voltpower and in total 70,000 BTU/hr of gas input is required.
- Hi-limit shut off
- Boil Out ByPass™
- 70,000 BTU/hr. input
- Drain valve interlock switch
- 1 1⁄4" port ball type drain valve
- 1 1⁄4" Diameter front gas manifold
- 3⁄4" Rear gas connection (capped)
- Solid state behind the door controls
- Electronic ignition (120 volt/60/1) (NEMA 5-15P)
- 18 gauge stainless steel filter pan (for filter models)
- 1⁄3 H.P. motor and pump for filter, at a rate of 8 gal/minute
- One touch push button switch to engage pump and motor
- Stainless steel front, front top ledge, sides, fry tank, base and stub back
- One year limited parts and labor warranty & 5 year limited fry tank warranty
- Energy saving Soft Start ignition system extends oil life while requiring lower BTU's
- Energy efficient ThreePass™ heat transfer system yielding 60.9% cooking efficiency and 72% thermal efficiency. ENERGY STAR® qualified.
- Flanged Feet
- Cap and cover front manifold
- 10" High Side Splash (removable)
- Set of 4 casters, 6" high (two locking)
- Micro-Filtration Fabric Envelopes (6 filters per pack)
- Stainless steel tank cover, doubles as work-top surface
- Single Bulk Baskets
- Extra set of twin Baskets
- Flexible gas hose with quick disconnect & restraining device
- Common condiment type, telescoping plate rails (starting at 24" length)
45-50 lbs. capacity Heavy Duty range match fryers, Vulcan model No. VFRY18F, 70,000 BTU/hr. input. Stainless steel fry tank with ThreePass™ heat transfer system, ENERGY STAR® qualified. Electronic ignition (120V/60/1). Solid state analog knob control. Stainless steel front, front top ledge, sides and base. For filter units, filter vessel constructed of 18 gauge stainless steel. A complimentary package of KleenScreen PLUS® Fabric Envelopes is also included. Units standard on 6" legs. 1 1⁄4" front gas manifold and 3⁄4" rear gas connection, capped.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan VFRY18F Accessories
Vulcan VFRY18F Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Vulcan VFRY18F
