Vulcan VCCG48-AR 48'' Countertop Gas Griddle with Thermostatic Controls - 120,000 BTU
Energy Star ?Chat Now
Calculate
Vulcan VCCG48-AR Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 105000 - 156000 |
| Cooking Surface Material | Chrome |
| Installation Type | Countertop |
| Burner Style | Griddle Top |
| Power Type | Natural or Propane Gas |
| Construction | Stainless and Aluminized Steel |
| With Griddle | Yes |
| Brand | Vulcan |
| Energy Efficiency | Energy Star |
| Made in | USA |
| Certifications | NSF |
| Number of Burners | 4 |
| BTU | 120,000 BTU |
| Control Type | Thermostatic |
| Heat | Gas |
| Usage | Heavy Duty |
| Voltage | 120 Volts |
| Width (in) | 48 |
| Height (in) | 18.8 |
| Depth (in) | 33.1 |
| Weight | 575.00 |
Additional Information on Vulcan VCCG48-AR
owner-s-manual-french.pdf 
parts-manual.pdf 
service-manual.pdf 
owner-s-manual.pdf 
sell-sheet.pdf 
vulcan-vccg48-ar.specsheet.pdf 
warranty-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan VCCG48-AR Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan VCCG48-AR Description
If your commercial kitchen needs a countertop griddle designed for heavy use, look no further than the Vulcan VCCG48-AR Heavy Duty Griddle. This 48” wide griddle comes complete with thermostatic controls for precise temperature control over the griddle top to make sure cooking is as repeatable and simple as possible. With a 1” thick steel griddle plate with a chrome finish, this griddle has plenty of thermal mass to keep the cooking surface at the ideal temperature while allowing the heat from the atmospheric burners to be applied evenly without hot or cold spots.
With four control knobs, the temperature of separate cooking zones can be precisely controlled from 200°F to 550°F. The four 30,000 BTU/hr atmospheric burners are spaced 12” apart to evenly apply heat to the griddle plate. Electronic ignition and a pilot protection system make startup simple.
To make sure this griddle stands up to commercial use it features a fully welded aluminized steel chassis and stainless steel construction for its front, sides, and front top ledge. Grease and crumbs that accumulate on the cooking surface are easily removed and stored in a 6 qt. drawer made from stainless steel. To empty the grease drawer it is simple to remove from the front of the griddle.
This griddle is mounted on adjustable 4” legs to make keeping it level easy and its cooking height is 14.7”.
This griddle has a ¾” rear gas connection and requires 120,000 BTU/hr of gas input. A 6-foot power cord is included with a NEMA 5-15 plug to attach it to a standard 120v outlet.
Standard Features:
- Chrome plated knob guards.
- 1" thick polished steel griddle plate.
- 14.7" cooking height on 4" adjustable legs.
- One year limited parts and labor warranty.
- Electronic ignition with pilot protection system.
- Stainless steel front, sides and front top ledge.
- Stainless steel 4" back and tapered side splashes.
- Fully welded stainless and aluminized steel chassis.
- 3⁄4" rear gas connection and internal gas pressure regulators.
- 120V 50/60 Hz. 2 Amp single phase with NEMA 5-15 USA plug.
- High capacity, stainless steel grease drawer (6 quart). 60" and 72" models have two grease drawers.
- Energy-efficient 24,000 BTU/hr. infrared burner or 30,000 BTU/hr. atmospheric burner for every 12" of griddle width.
- Every 12" griddle cooking zone is independently controlled by solid state temperature and electronic ignition system with diagnostics.
- Temperature adjusts from 150° to 550° F on Steel or Chrome plate. Temperature adjusts from 150° to 450° F on Rapid Recovery™ plate.
- Top seam welding available on steel plate.
- Side grease models with 3.75 gallon grease drawer.
- Grooved steel plate (available with top seam welding).
- Chrome griddle plate (not available with top seam welding).
- Cutting board, condiment rail, plate rail and banking strip accessories.
- Rapid Recovery™ griddle plate (150-450° F controls, 60" maximum length, standard with top seam welding).
Heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel chassis. 14.7" cooking height on 4" legs. 1" polished steel griddle plate. Stainless steel back and tapered side splashes. Energy-efficient 24,000 BTU/hr. infrared burner or 30,000 BTU/hr. atmospheric burner for every 12" of griddle width. Every 12" griddle cooking zone is independently controlled by solid state temperature and electronic ignition system with diagnostic feature. Temperature adjusts from 150° to 550° F on Steel or Chrome plate. Temperature adjusts from 150° to 450° F on Rapid Recovery™ plate. Electronic ignition with pilot safety system. High capacity 6 quart stainless steel grease drawer. 120V 50/60Hz 2 amp single phase with NEMA 5-15 USA plug. 3⁄4" rear gas connection and internal gas pressure regulators. CSA Design Certified. NSF Certified.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan VCCG48-AR Accessories
Vulcan VCCG48-AR Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Vulcan VCCG48-AR to Other Products
Items Related to Vulcan VCCG48-AR
